Hobart FD4/150-2 Commercial Garbage Disposer - 1 1/2 hp, 115/230V

Description

Hobart FD4/150-2 Commercial Garbage Disposer - 1 1/2 hp, 115/230V
FOOD WASTE DISPOSER A disposer installed at each work station, in addition to the soiled dish table unit, provides the maximum of convenience and sanitation. Food waste is ground and flushed through the drain lines instead of accumulating… eliminates handling and storage of filled garbage containers. MEDIUM SIZE FAST, ECONOMICAL In a profitable foodservice operation, there’s no space, time or budget allowance for inefficient food waste handling. Here are the medium-sized disposers that can end food waste storage, removal and clean-up – fast, economically. SPECIFICATIONS MOTORS: Continuous duty rating, equipped with manual reset thermal overload inherent protection. Permanently lubricated ball bearings for upper and lower shaft support. HOUSINGS: Heavy ductile iron upper housing. Ductile gray cast iron lower housing, primed and powder coated. Four bolts fasten the motor unit to the grind chamber, permit easy removal. LEGS: Tubular stainless steel with flanged feet to support housing. Adjustable to 3" in either direction. MOUNTING: All Hobart Disposers fasten to 7" I.D. (throat opening) cones. A vinyl isolating ring eliminates metal-to-metal contact at the cone mounting, reduces vibration and noise transmission. STATIONARY SHREDDER RING: Abrasion resistant, heated treated cast ductile iron, 1 3⁄8" high, 40 grinding teeth. FLYWHEEL: Two hardened ductile iron cutter blocks (fastened to flywheel with loctite) are replaceable, can be indexed for new cutting edges. Hardened cast ductile iron flywheel is 8" diameter. MOTOR SHAFT SEAL: Mechanical face-type seal consists of spring loaded carbon ring insert in chemical resistant neoprene bellows. Mating surfaces are protected from grit or fibers by being recessed into flywheel. DRAIN CONNECTOR: The removable outlet flange is tapped for 2" pipe connection. DUAL DIRECTIONAL GRINDING: Hobart Disposers operate in either direction of flywheel rotation. Direction of rotation can be controlled by the operator (to increase life and efficiency of grinding elements – back flywheel free of a “jam”) when installed with Control Groups 5 & 6. WEIGHT: Shipping – Approx. 158 lbs. (does not include accessory group or controls). Voltage 115/230 Volts Wattage 915 - 1,008 Watts Horsepower 1 1/2 HP
Hobart FD4/150-2 Commercial Garbage Disposer - 1 1/2 hp, 115/230V
FOOD WASTE DISPOSER
A disposer installed at each work station, in addition to the soiled dish table unit, provides the maximum of convenience and sanitation. Food waste is ground and flushed through the drain lines instead of accumulating… eliminates handling and storage of filled garbage containers.
MEDIUM SIZE FAST, ECONOMICAL
In a profitable foodservice operation, there’s no space, time or budget allowance for inefficient food waste handling. Here are the medium-sized disposers that can end food waste storage,  removal and clean-up – fast, economically.
SPECIFICATIONS
MOTORS
: Continuous duty rating, equipped with manual reset thermal overload inherent protection. Permanently lubricated ball bearings for upper and lower shaft support.
HOUSINGS
: Heavy ductile iron upper housing. Ductile gray cast iron lower housing, primed and powder coated. Four bolts fasten the motor unit to the grind chamber, permit easy removal.
LEGS
: Tubular stainless steel with flanged feet to support housing. Adjustable to 3" in either direction.
MOUNTING
: All Hobart Disposers fasten to 7" I.D.  (throat opening) cones. A vinyl isolating ring eliminates metal-to-metal contact at the cone mounting, reduces vibration and noise transmission.
STATIONARY SHREDDER RING
: Abrasion resistant, heated treated cast ductile iron, 1 3⁄8" high,  40 grinding teeth.
FLYWHEEL
: Two hardened ductile iron cutter blocks (fastened to flywheel with loctite) are replaceable, can be indexed for new cutting edges. Hardened cast ductile iron flywheel is 8" diameter. MOTOR SHAFT SEAL: Mechanical face-type seal consists of spring loaded carbon ring insert in chemical resistant neoprene bellows. Mating surfaces are protected from grit or fibers by being recessed into flywheel.
DRAIN CONNECTOR
: The removable outlet flange is tapped for 2" pipe connection.
DUAL DIRECTIONAL GRINDING
: Hobart Disposers operate in either direction of flywheel rotation. Direction of rotation can be controlled by the operator (to increase life and efficiency of grinding elements – back flywheel free of a “jam”) when installed with Control Groups 5 & 6.
WEIGHT
: Shipping – Approx. 158 lbs. (does not include accessory group or controls).
Voltage
115/230 Volts
Wattage
915 - 1,008 Watts
Horsepower
1 1/2 HP
×
×
×
×
×
×
×
×
×
×
×
Buy now and save!
Tell a friend
Watch now
Postage info
Click the Postage tab above the listing description for more info
FREE Postage
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Garland G60-6R24RR NAT 6 Burner 60" Range, 24" Raised Griddle, 2 Standard Ovens
Garland G60-4G36RR LP Gas 4 Burner 60" Range with 36" Griddle, 2 Standard Ovens
Peerless CE131PE Electric Countertop Pizza Oven
Amana RCS10TS Commercial Microwave Oven Medium Volume - 120V, 1000W
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Restauranium
Postage
Shipping is FREE for this item
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by