1PCS TEM liquid sample preparation base plate Electron microscope consumables

Description

The details are as follows:
Material: aluminum alloy
Length: 60mm Width: 20mm Height: 5mm
Product operating instructions:
1. First place the copper mesh in the hole of the preparation plate, and record the corresponding hole number in order to distinguish different samples;
2. Then use a pipette (720000) to draw an appropriate amount of sample (about 20μl) drop by drop on the copper mesh;
3. For non-viscous samples, the pipette tip is directly removed from the top; for viscous biological samples, pull out the pipette tip along the side hole;
4. Put the sample preparation plate under the infrared baking lamp (LP23030-B) to dry, or let it dry overnight, and then take it out with the special tweezers (EZ5888A/EZ5889A) for the electron microscope observation.
Product advantages show:
1. For non-biological samples, the pipette can pick up nano-micron samples with an appropriate concentration, and it is successful once, and there is no need to repeatedly drop samples.
It avoids the sample being sucked away by the filter paper, resulting in the sample being too dilute, and repeated dropping of the sample often leads to the problem of the sample being too concentrated.
2. For biological samples, it is difficult to drop samples (biological samples often have the problem that the copper mesh sticks to the pipette tip after dripping the sample), using this sample preparation bottom plate, the pipette tip can be easily withdrawn from the side hole in the plate.
Effortless TEM preparation of biological samples
Sample cleaning method:
Put the sample plate into a 250ML beaker and add an appropriate amount of ethanol to clean it.
On Jul 18, 2022 at 21:01:29 PDT, seller added the following information: